Table of Contents
Advertisement
3. To configure advanced settings, see
4. Click
Apply/Save
to commit your changes.
The modulation settings are described in the table below.
Modulation Data Transmission Rate
G.Dmt
ITU-T G.992.1 standard.
G.lite
ITU-T G.991.2 standard.
T1.413
ANSI T1.413 Issue 2 standard.
ADSL2
ITU-T G.992.3 standard.
AnnexL
Annex L of ITU-T G.992.3 standard which supports longer loops
but with reduced transmission rates.
ADSL2+
ITU-T G.992.5 standard.
AnnexM
Annex L of ITU-T G.992.5 standard which supports extended
upstream bandwidth.
VDSL2
ITU-T G.993.2 standard.
The following table explains the maximum transaction power for each profile supported for SmartRG gateways.
Parameter
Max DS Tx Power (dBm)
Max US Tx Power (dBm)
Min bidirectional net data rate
Field Name
Description
Other Settings
This option is enabled by default. To disable it, click the checkbox to clear it.
US0
Inner
The RJ11 connector has four contacts. The center pair of pins is DSL1. The outer pins are the con-
Pair/Outer Pair
tacts for DSL2. Select which pair should be used.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
"Advanced
settings".
8a
8b
8c
+17.5
+20.5
+11.5
50Mbps
Max Downstream
Max Upstream
(Mbps)
(Mbps)
12
1.3
4
0.5
8
1.0
12
1.0
28
1.0
24
3
100
60
8d
12a
12b
17a
+14.5
+14.5
68Mbps
100Mbps
82
Advertisement
Table of Contents
