Table of Contents
Advertisement
Device Manager by SmartRG
l
Cisco Prime Home
l
Calix Consumer ACS
l
A minimum firmware level of v2.5.0.x is required.
If you need to modify the request defaults, consult the ACS manufacturer's documentation.
1. In the left navigation bar, click
2. Modify the fields as needed, following the instructions from your ACS platform vendor. Information about specific fields is
provided in the table below.
3. Click
Apply/Save
to commit your changes.
Note: This manual does not cover the setup of your ACS. Consult the materials provided by your ACS vendor to determine the
appropriate parameters and server settings for configuring remote WAN side management via an ACS using the TR-069 Pro-
tocol.
The fields on this page are explained in the following table.
Note: Please consult with your ACS vendor for any specific connection request requirements impacted by the following set-
tings.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
Management
>
Management
Server. The following page appears.
111
Advertisement
Table of Contents
