Certificate; Local - ADTRAN SMART/RG SR501n User Manual

1. On the IPSec Settings page, click
2. Fill in the fields, using the information in the table below.
Field Name
Mode
Encryption Algorithm
Integrity Algorithm
Select Diffie-Hellman
Group for Key Exchange
Key Life Time
3. Click Apply/Save to commit your changes.

Certificate

In this section, you can configure certificates for the gateway. You can use Local and Trusted CA certificates on this gateway.

Local

Local certificates are used to identify the gateway to other users. On this page, you can create a new certificate request and have it
signed by a certificate authority, or you can import an existing certificate.
For additional info regarding Public Key Infrastructure (PKI), refer to ITU-T X.509.
1. In the left navigation bar, click
lowing page appears.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
Show Advanced Settings
Description
Select a mode. Options are Main and Aggressive.
Select the encryption algorithm. Options are 3DES , AES -128, AES-192, and AES-256.
Select the integrity algorithm. Options are MD5 and SHA1.
Select the D-H group. Options are 768bit - 8192bit. The default is 1024bit.
Enter the number of seconds that a key is valid. The default is 3600 seconds.
Advanced Setup > Certificate
to display the Phase 1 and Phase 2 fields.
> Local and then click Create Certificate Request. The fol-
94