Advanced Ike Settings - ADTRAN SMART/RG SR501n User Manual

Field Name
Key Exchange Method
Authentication Method
Pre-Shared Key
Perfect Forward Secrecy
The following fields appear below
Encryption Algorithm
Encryption Key
Authentication Algorithm
Authentication Key
SPI

Advanced IKE Settings

You can configure advanced IKE settings if desired.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
Description
When you select Domain or E-Mail, enter the domain name or email address in
the ID Content field.
Select the key-exchange method to be used for IPSec. Options are:
Auto(IKE): This method uses the negotiated key-exchange method for
l
IPSec. This is the default and recommended for best results.
Manual: This method requires that you configure the details.
l
Select the method by which the remote end will authenticate.
Pre-Shared Key: A key is distributed to authorized users for logging into
l
the system. Enter the key in the
Certificate (X.509): A certificate is used for authentication. Select the
l
certificate file in the
If you selected Pre-Shared Key in the
key here.
Select whether a session key is derived from a set of long-term keys is com-
promised if one of the long-term keys in the set is compromised.
Enable: Prevents long-term key from being compromised.
l
Disable: Permits long-term keys to be compromised.
l
Advanced Settings when Manual is selected in the
Select the encryption algorithm. Options are 3DES and AES.
Enter the hex value for the selected encryption algorithm.
Select the authentication algorithm. Options are MD5 and SHA1 .
Enter the hex value for the selected authentication algorithm.
Enter the hex value for the service provider interface (SPI). The default is 101 .
Pre-Shared Key field.
Certificates field that appears.
Authentication Method
Key Exchange Method
field, enter the
field.
93