Table of Contents
Advertisement
Field Name
Description
Specify Egress Queue
Select the egress queue for this rule. Options are the queues already configured.
Mark Applied Dif-
Select the desired DSCP code for marking classification results.
ferentiated Service Code
Point
802.1P priority
This value is inserted into the Ethernet frame and used to differentiate traffic. Lower
values assign higher priorities. Options are: 1 - 7.
Set Rate Limit
Enter the data traffic rate limit (in Kbps) applied for this classification.
QoS Port Shaping
QoS Port Shaping facilitates setting a fixed rate (Kbps) for each of the Ethernet ports.
1. In the left navigation bar, click
2. Fill in the fields, using the information in the table below.
3. Click
Apply/Save
to commit your changes.
The fields on this page are explained in the following table.
Field Name
Description
Interface
Each entry in this column represents one of the Ethernet LAN ports on the gateway.
Shaping Rate (Kbps)
Enter the data rate for packets on the specified Interface. Options are: 1 - 1,000,000
Kbps. The default is -1 (no shaping).
Burst Size (bytes)
Enter the burst size to be applied to packets in the defined queue. Options are 1600
bytes or greater.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
Advanced Setup
>
Quality Of Service
>
QoS Port
Shaping. The following page appears.
72
Advertisement
Table of Contents
