Table of Contents
Advertisement
2. To add a virtual server, click Add. The following page appears.
3. Customize the fields to create your port forwarding entry, using the information provided in the table below.
4. Click
Apply/Save
to commit your changes.
The fields on this page are explained in the following table.
Field Name
Description
Use Interface
Select the WAN interface to which this NAT rule will apply.
Select a Service
Select from a list of application that typically require port forwards configured. The port ranges
and protocol fields will be pre-populated.
Custom Service
If your application does not appear in the
the application in this field.
Server IP
Enter the IP address of the LAN client where the service is hosted.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
Select a Service
list, you can enter a unique name for
56
Advertisement
Table of Contents
