ADTRAN SMART/RG SR501n User Manual page 29

2. Select the Layer2 interface to use for the WAN service and click Next. The following page appears.
3. Select the PPP over Ethernet (PPPoE)
4. Modify the other settings as needed, using the information in the following table.
Field Name Description
Enter Service Enter a name to describe this configuration.
Description
Enter 802.1P Pri- Options are 0 - 7. The default is 0.
ority
For tagged service, enter values in this field and the
For untagged service, enter -1 (disabled) in this field and the
Enter 802.1Q Options are 0 - 4094. The default is -1 (disabled).
VLAN ID
For tagged service, enter values in this field and the
For untagged service, enter -1 (disabled) in this field and the
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
WAN service type.
802.1Q VLAN ID field.
802.1Q VLAN ID field.
802.1P Priority field.
802.1P Priority field.
28