Security Log - ADTRAN SMART/RG SR501n User Manual

4. To modify the system log settings:
a. Click Configure System
b. Modify the settings as needed, using the information provided in the following table.
Action
Log
Logging Level Select Error unless actively troubleshooting a situation with a subscriber for which increased log
Display Level
Mode
c. Click Apply/Save

Security Log

The security log contains a history of events related to sensitive access to the gateway. Logged events include:
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
Log. The System Log - Configuration page appears.
Description
Select to turn logging off or on. The default is Disable.
detail is required. Options are Emergency, Alert, Critical, Error, Notice, Warning, Informational,
and Debugging. The options are listed in top-down order. The default is Debugging.
Select Error unless actively troubleshooting a situation with a subscriber for which increased
detail is required. This field has the same options as the
Select where log events will be sent.
To send logs to the specified IP address and UDP port of a remote syslog server, select Remote or
Both.
To record events in the local memory of your SmartRG gateway, select Local or Both.
to save your changes.
Logging Level field. The default is Error.
109