Table of Contents
Advertisement
1. On the MAC Filtering page, click Add. The following page appears.
2. Fill in the fields, using the information provided in the following table.
3. Click
Save/Apply
to commit your changes.
The fields on this page are explained in the following table.
Field Name
Description
Protocol Type
Select the protocol associated with the device at the destination MAC address. Options are
PPPoE , IPv4 , IPv6 , AppleTalk , IPX , NetBEUI , and IGMP .
Destination MAC
Enter the MAC address of the hardware you wish to associate with this filter.
Address
Source MAC
Enter the MAC address of the device that is originating requests intended for the device asso-
Address
ciated with the
Frame Direction Select the incoming/outgoing packet interface. Options are LAN<=>WAN , WAN=>LAN , and LAN-
N=>WAN . The default is LAN<=>WAN .
WAN Interfaces Select the interface to which the filter should be applied.
Parental Control
In this section, you can configure the Parental Control features of your SmartRG gateway to restrict Internet access to certain hours
and to certain URLS.
Time Restriction
On this page, you can restrict Internet access to particular days and specific times for each device that accesses your gateway.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
Destination MAC Address
.
64
Advertisement
Table of Contents
