ADTRAN SMART/RG SR501n User Manual page 40

6. Enter the relevant WAN IP Settings, using the information provided in the following table.
Field Name
Obtain an IP address auto-
matically
Option 60 Vendor ID
Option 61 IAID
Option 61 DUID
Option 77 User ID
Option 125
Option 50 Request IP
Address
Option 51 Request Leased
Time
Option 54 Request Server
Address
Use the following Static IP
address
WAN IP Address
WAN Subnet Mask
WAN gateway IP Address
Advanced DMZ
Non DMZ IP Address
Non DMZ Net Mask
IPv6 settings
The following fields appear when either IPv6 Only or IPv4&IPv6 (Dual Stack) network protocols are selected on
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
Description
Select when you want the ISP to automatically assign the WAN IP to the gateway.
(Optional) Broadcast a specific vendor ID for the DHCP server to accept the device.
(Optional) Interface Association Identifier (IAID). A unique identifier for an IA, chosen
by the client.
(Optional) DHCP Unique Identifier (DUID) is used by the client to get an IP address from
the DHCP server.
( Optional ) Enter the user class ID that should be used to filter traffic.
( Optional ) Select whether to enable local devices to automatically receive DHCP
options from the server. This option is disabled by default. To enable it, click Enabled .
Select to request a specific IP address when sending messages. If the address is not
available, the DHCP server assigns the next allowed IP address.
Select to request the maximum lease time defined for the client.
Select to request the IP address of the source server.
Select when you want to manually declare the static IP information provided by your
ISP. The WAN address fields become available.
Enter the static WAN IPV4 Address.
Enter the static subnet mask.
Enter the static gateway IP address.
(Optional) Select this option to enable Advanced DMZ on the WAN service. For more
information, see the knowledgebase on SmartRG Support site.
If using the Advanced DMZ feature, you can enter a specific vendor ID that will be
broadcast for the DHCP server to accept the device, e.g., 192.168.2.1.
If using the Advanced DMZ feature, you can enter a secondary LAN IP address for the
gateway. The default is 255.255.255.0.
39