A4 Inverter; Tools Required; Removal Procedure; Replacement Procedure - Agilent Technologies PSG Series Service Manual

Assembly Replacement

A4 Inverter

A4 Inverter

Tools Required

• none

Removal Procedure

Refer to Figure 2-8 for this procedure.
1. Disconnect the power cord.
2. Remove the front panel. Refer to
3. Disconnect the A4W1 cable from the A31 Motherboard P12.
4. Disconnect the A2DSW1 cable from the A4 Inverter.
CAUTION
The A4 Inverter is fragile and can be damaged when pulled away from the velcro attachment.
5. Remove the A4 Inverter by pulling it away from the front panel.

Replacement Procedure

• Reverse the order of the removal procedure.
• Perform the post-repair adjustments and performance tests that pertain to this removal procedure.
2-18
"Front Panel" on page 2-8.