Agilent Technologies PSG Series Service Manual page 238

Post-Repair Procedures
Post-Repair Procedures Matrix
Table 4-4 Performance Tests for Assemblies A21 through A32, B1, and RF Output Connector
Performance Tests Replaced Assembly
The following performance tests are
listed in the order that they should be
performed to minimize changes in test
equipment configurations.
Self Tests
Maximum Leveled Output Power
Power Level Accuracy
Internal Pulse Modulation Level Accuracy
Internal Pulse Modulation Rise/Fall Time
Internal Pulse Modulation Minimum Pulse Width
DC FM Carrier Offset
External AM Frequency Response
Internal FM Frequency Response
External Phase Modulation Frequency Response
Internal FM Distortion
Internal Phase Modulation Distortion
External FM Deviation Accuracy
Internal Phase Modulation Deviation Accuracy
External Pulse Modulation ON/OFF Ratio
Harmonic Spurious
Sub-Harmonic Spurious
Non-Harmonic Spurious
Single-Sideband Phase Noise
4-5