Mid Top View (E8241A And E8251A Models Only) - Agilent Technologies PSG Series Service Manual

Replaceable Parts
Cables

MID Top View (E8241A and E8251A Models Only)

Table 3-12

MID Top View (E8241A and E8251A Models Only)

Reference
Designator
* Wire Cable, A25B High Band Detector Bias Board to J12 of A26 MID
A25BW1
W24 Semi-Rigid Cable, A24 20 GHz High Band Coupler Output to AT1 Input Option 1E1
W25 Semi-Rigid Cable, AT1 output to APC 3.5 RF Output Adapter Option 1E1
W26 Semi-Rigid Cable, A24 20 GHz High Band Coupler Output to APC 3.5 RF Output Adapter (models
without Option 1E1) not shown
W27 Semi-Rigid Cable, A23 Low Band Coupler/Detector Input to J3 of A30 Modulator Filter with Standard or
High Power
W28 Ribbon Cable, J100 of A23 Low Band Coupler/Detector to J15 of A26 MID
W48 Semi rigid Cable, A24 20 GHz High Band Coupler to J2 of A30 Modulator Filter with Standard or High
Power
W33 Ribbon Cable, J32 of A26 MID to J10 of A29 20 GHz Doubler
W34 Ribbon Cable, J31 of A26 MID to J10 of A30 Modulator Filter with Standard or High Power
W35 Ribbon Cable, J10 of A26 MID to P201 of A31 Motherboard
W36 Ribbon Cable, AT1 to J13 of MID Option 1E1
Load Load 50 ohm, J4 of A30 Modulation Filter
*. This cable is not replaceable by itself. You must order the corresponding assembly.
3-30
Description Qty Part Number
1 (part of A25)
1 E8251-20026
1 E8251-20027
1 E8251-20034
1 E8251-20031
1 8121-0616
1 E8251-20021
1 8121-0613
1 8121-0613
1 8121-0615
1 5062-6646
1 1810-0118