Self-Test Failures And Related Troubleshooting - Agilent Technologies PSG Series Service Manual

Self-Test Failures and Related Troubleshooting

This section has a two column table: one column has self-test errors and a second column has a list of sections
to go for assembly level troubleshooting procedures.
Table 1-12 Self-Test Failures and Related Troubleshooting
If a self-test for this
assembly fails...
A5 Sampler
200 Power Supply
201 Tuning + Bias Test
202 Coarse Loop Detector
203 YO Loop Detector
A7 Reference
300 1 GHz Detector
301 Tuning Voltage
A8 Output
400 Lowband Ground and PTAT Test
401 Prelevel Loop Test
402 Switching Filter Test
403 ALC Mod System Test
404 Mod System Test
405 Het Band Test
406 RF Path Test
A9 YIG Driver
600 Post Regulator
601 DACs
602 PLL Regulators
603 FM Driver
A6 Frac-N
700 Ref Voltage
701 Loop Gain
702 Tuning Voltage
703 Output Voltage
704 Filter Test
705 F/2 Test
706 FM Path Test
Go to this assembly troubleshooting section...
"Self-Tests 2xx: A5 Sampler Self-Test Errors" on page 1-24
"Self-Tests 3xx: A7 Reference (Standard) Self-Test Errors" on page 1-26
"Self-Tests 4xx: A8 Output Self-Test Errors" on page 1-27
"Self-Tests 6xx: A9 YIG Driver Self-Test Errors" on page 1-29
"Self-Tests 7xx: A6 Frac-N Self-Test Errors" on page 1-31
Self-Test Failures and Related Troubleshooting
Troubleshooting
1-15