Load up to
25 index cards, photo papers, or postcards
Saving paper default settings
You can set the default paper settings for the documents and photos that you print.
1
From the home screen, touch
Note: If you have installed two trays in your printer, then touch
Setup.
2
Choose the default settings:
•
If you want to set the default paper size, then navigate to:
Paper Size > select the default paper size > Accept
•
If you want to set the default paper type, then navigate to:
Paper Type > select the default paper type > Accept
Make sure
•
The thickness does not exceed 0.025 inches (0.635 mm).
•
The print side of the photo paper faces down.
•
You load the photo paper in the center of the tray, as indicated by the
4 x 6‑inch photo paper outline.
•
The paper guides rest against the left, right, and bottom edges of the
paper.
Note: For best results, allow photos to dry at least 24 hours before
stacking, displaying, or storing.
> Paper Setup.
Loading paper and original documents
36
, select the paper tray, and then touch Paper