Load up to
20 sheets of banner paper
Saving paper default settings
You can set the default paper settings for the documents and photos that you print.
1
From the home screen, navigate to Paper Setup:
> Paper Setup
2
Choose the default settings:
•
If you want to set the default paper size:
a
Touch Paper Size.
b
Select the default paper size for the printer, and then touch Accept.
•
If you want to set the default paper type:
a
Touch Paper Type.
b
Select the default paper type for the printer, and then touch Accept.
Make sure
•
The print side of the banner faces down.
•
The leading edge of the banner paper feeds into the printer first.
•
If your printer has more than one paper tray, then load banner paper in
Tray 1.
To load banner paper:
1
Pull the tray completely out of the printer.
2
Remove all paper from the tray.
3
Move the paper guides as though you were loading legal-size paper.
4
Squeeze the lever and pull to extend the tray to legal size.
5
Tear off only the number of pages needed to print the banner.
6
Set the stack of pages in front of the printer.
7
Slide the first sheet from the stack of pages over the tray handle and all
the way into the back of tray.
Loading paper and original documents
35