Lexmark Pro915 User Manual page 108

If the printer is currently set up for Ethernet
1
Unplug the Ethernet cable from the printer.
2
Place the printer close to the computer you want to use to configure the printer for wireless access.
Note: You will need to connect the printer to the computer with a USB cable. Make sure the printer is close
enough to the computer for your USB cable to reach both.
3
Click or Start.
4
Click All Programs or Programs, and then select the printer program folder from the list.
5
Navigate to:
Printer Home > select your printer > Settings tab > Wireless setup utility
6
Follow the instructions on the computer screen.
Using the printer locally (USB)
Select the connection type that describes how you currently access your printer:
If the printer is currently set up for Ethernet
1
Attach a USB cable to the computer and to the printer.
2
Wait a moment for Windows to locate the driver and finish setting up the printer.
3
Select the USB printer. See "Selecting the printer" on page 109.
If the printer is currently set up for wireless
1
Attach a USB cable to the computer and to the printer.
2
Wait a moment for Windows to locate the driver and finish setting up the printer.
3
Select the USB printer. See "Selecting the printer" on page 109.
Note: You can continue to use the printer through Ethernet or wireless connection.
Using the printer over an Ethernet network
Select the connection type that describes how you currently access your printer:
If the printer is currently set up for wireless
1
Plug an Ethernet cable into the printer and into an available port on a switch or wall jack.
2
Wait one minute for the Ethernet network adapter to become active and acquire an IP address from the
network.
3
Select the Network printer. See "Selecting the printer" on page 109.
Note: The wireless adapter of the printer is disabled while it is connected to an Ethernet network.
If the printer is currently set up locally (using USB connection)
1
Plug an Ethernet cable into the printer and into an available port on a switch or wall jack.
2
Insert the installation software CD into the computer you want to use to configure the printer.
Networking
108