Saving Paper Default Settings; Loading Original Documents On The Scanner Glass - Lexmark W01 User Manual

Load up to:
10 iron-on transfers
50 transparencies

Saving paper default settings

You can set the default paper settings for the documents and photos that you print.
1
From the home screen, navigate to Paper Setup:
> Paper Setup
2
Choose the default settings:
•
If you want to set the default paper size:
a
Touch Paper Size.
b
Select the default paper size for the printer, and then touch Accept.
•
If you want to set the default paper type:
a
Touch Paper Type.
b
Select the default paper type for the printer, and then touch Accept.

Loading original documents on the scanner glass

1
Open the scanner lid and place the document facedown on the scanner glass.
2
Close the scanner lid.
Make sure that:
Loading paper and original documents
30
•
You follow the loading instructions on the iron-on
transfer packaging.
•
The print side of the transfer is faceup.
•
The paper guides rest against the edges of the transfer.
•
You select Automatic, Normal, or Photo print quality.
•
The rough side of the transparencies is faceup.
•
The paper guides rest against the edges of the
transparencies.