Ink Low - Lexmark Pro915 User Manual

Ink Low

You may need to replace the specified ink cartridge soon. Try one or more of the following:
•
If a Cartridge Finder widget has been downloaded to you printer, then touch Find Ink.
The Cartridge Finder solution available in the SmartSolutions menu appears.
•
Touch OK to clear the message and continue printing.
Note: Depending on your printer settings, you may not be allowed to continue printing until you replace the
specified cartridge.
•
See the User's Guide or visit the Lexmark Support Web site at http://support.lexmark.com for a list of supported
ink cartridges.
Load [Paper Source] with [Size] Paper
Try one or more of the following:
•
Load the specified paper in the tray.
• Touch Paper Loaded, Continue to clear the message and continue printing.
•
Press to cancel the current job.
Load [Paper Source] with [Size] [Type] Paper
Try one or more of the following:
•
Load the specified paper in the tray.
•
Touch Paper Loaded, Continue to clear the message and continue printing.
•
Press to cancel the current job.
Memory Device Error
Try one or more of the following:
• Remove the memory device, and then reinsert it into the card slot or USB port.
•
Touch OK or press
Network [x] Software Error
[x] is the number of the network connection.
Try one or more of the following:
• Touch Continue to clear the message.
•
Turn the printer off and then back on to reset the printer.
to clear the message.
Troubleshooting
143