Saving Paper Default Settings - Lexmark Pro715 User Manual

Load up to
25 index cards, photo papers, or postcards

Saving paper default settings

Note: The default settings apply only to print, copy, and scan jobs that you initiate from the printer.
1
From the printer control panel, press
2
Choose the default settings:
•
If you want to set the default paper size, then navigate to:
Setup > > Paper Setup >
•
If you want to set the default paper type, then navigate to:
Setup > > Paper Setup >
Make sure
•
The thickness does not exceed 0.025 inches (0.635 mm).
•
The print side of the photo paper faces down.
•
You load the photo paper in the center of the tray, as indicated by the
4 x 6‑inch photo paper outline.
• The paper guides rest against the left, right, and bottom edges of the
paper.
Note: For best results, allow photos to dry at least 24 hours before
stacking, displaying, or storing.
.
> Paper Size >
> Paper Type >
Loading paper and original documents
39
> select the default paper size >
> select the default paper type >