Adjusting The Ringer Volume; Answering Machine - Lexmark Pro915 User Manual

How do I adjust the speaker volume on the printer?
Listen to the dial tone to check if the telephone line is working and to check if the cables and devices are connected
properly to your telephone network. Make sure that the dialing volume is not set to Off, especially if you are dialing
a number on hook. If you set the printer to receive faxes manually, then make sure that you set the ringer volume
loud enough for you to hear it.
Adjusting the dialing volume
1
From the home screen, navigate to:
> Fax Setup > Dialing and Sending > Speaker Volume
2
Select a dial volume setting, and then touch Accept.

Adjusting the ringer volume

1
From the home screen, navigate to:
> Fax Setup > Ringing and Answering > Ringer Volume
2
Select a ringer volume setting, and then touch Accept.
How can I make sure that fax calls go to the printer and voice calls go to the

answering machine?

To make sure the printer picks up incoming faxes, set Auto Answer to On, and then set the printer to pick up after a
greater number of rings than the answering machine. For example, if the answering machine picks up calls after four
rings, then set the printer to pick up after six rings. This way, the answering machine picks up calls first and your
voice calls are received. If the call is a fax, then the printer detects the fax signal on the line and takes over the call.
What settings work best with voice mail service?
Voice mail and fax can share the same telephone line if you subscribe to a distinctive ring service offered by your
telephone company. This feature allows you to have multiple telephone numbers on one telephone line. Each
telephone number has a designated ring pattern (All Rings, Single Ring Only, Double Ring Only, Triple Ring Only,
Single or Double Rings Only, Single or Triple Rings Only, Double or Triple Rings Only). The different ring patterns let
you know which telephone number was dialed, and which device you should use to answer the call.
If you do not have distinctive ring service, then set the printer to receive faxes manually (Auto Answer Off). This
setting lets you receive both voice calls and fax calls, but works best if you use voice mail more often. You need to
turn off voice mail whenever you are expecting a fax.
How do I change the resolution of the documents that I fax?
The resolution, or fax quality, of the documents that you send may affect fax transmission. The receiving fax machine
may not support high resolutions, resulting to a failed fax. You can fix this by enabling Auto Fax Convert. Make sure
the original documents are not blurred.
Faxing
93