Tips for sending faxes
•
Make sure the printer is on and connected to a working telephone, DSL, or VoIP line. The line is working if you
hear a dial tone.
•
Make sure the exit bin is fully extended and the bin extender is flipped out.
•
Depending on your printer model, use the ADF when scanning duplex (two‑sided) pages.
•
To easily retrieve a document after copying or scanning, lift the ADF input tray.
•
When using the ADF, adjust the paper guide on the ADF to the width of the original document.
•
When using the scanner glass, close the scanner cover, if possible, to avoid dark edges on the scanned image.
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
•
When the document to be faxed is in place with the settings you want, press
Sending faxes using the printer control panel
1
Load an original document.
2
Touch Fax.
3
Send the fax:
To send a fax to a single recipient:
a
Enter a fax number, or touch Address Book or History to import a contact.
b
Touch
.
To send a fax to multiple recipients (broadcast fax):
a
Touch Fax to Multiple, and then touch Add a Number.
b
Enter a fax number, or touch Address Book or History to import a contact. Repeat this step until you have
entered the numbers of all the recipients.
Touch Accept every time you add a recipient.
c
Touch
.
Warning—Potential Damage: Do not touch the cables or the
Tips:
•
You can broadcast a fax to up to 30 recipients.
•
Touch More Options to set a color or black‑and‑white fax, adjust the quality of the fax, set the size of the
document, add a cover page, schedule the fax, or view pending faxes.
Sending faxes using the computer
For Windows users
1
With a document open, click File > Print.
2
Make sure the appropriate printer is selected, and then click Properties, Preferences, Options, or Setup.
3
Click the Fax tab, and then make sure Enable Fax is selected.
and
ports while sending a fax.
Faxing
88
to send the fax.