Lexmark Pro915 User Manual page 107

For Macintosh users
1
From the Applications folder in the Finder, or from the Finder desktop, double-click the printer folder.
2
Double‑click Wireless Setup Assistant.
3
Follow the instructions on the computer screen.
Configuring the printer wirelessly using WPS (Windows only)
‑
With Wi Fi Protected Setup (WPS), it is easy to add computers or printers to your wireless network because the SSID
and WPA passphrase are automatically detected and configured for you.
1
Make sure your access point (wireless router) supports WPS.
2
Insert the installation software CD and follow the instructions on the computer screen.
Notes:
•
If you are using the PIN method to add your printer using WPS, then make sure you type all eight digits when
you are asked to enter your PIN.
•
To use WPS to configure the printer wirelessly, all of the devices on your wireless network must support WPS. If
any device on your network does not support WPS, then you must type the SSID and security information when
prompted.
Switching between USB, Ethernet, and wireless connections (Windows only)
You can change the way you access your printer, depending on your needs. The following procedures assume that
you have configured your printer for one type of connection and that the printer drivers are installed on the
computer. See related topics on troubleshooting specific connection types if you encounter difficulties during
configuration.
Note: The printer supports one active local connection (USB) and one active network connection (Ethernet or
wireless) at a time. It is not possible to connect the printer to both Ethernet and wireless networks at the same time.
Using the printer wirelessly
Select the connection type that describes how you currently access your printer:
If the printer is currently set up locally (using USB connection)
1
Click or Start.
2
Click All Programs or Programs, and then select the printer program folder from the list.
3
Navigate to:
Printer Home > select your printer > Settings tab > Wireless setup utility
4
Follow the instructions on the computer screen.
Note: There is no need to remove the USB cable connecting the printer to the computer during wireless
configuration.
Networking
107