Scanning To A Network Computer; Scanning A Two-Sided Document Using The Adf; Scanning To A Flash Drive Or Memory Card - Lexmark Pro915 User Manual

The scan is complete when a message appears on the printer control panel indicating that the file you scanned has
been saved.

Scanning to a network computer

1
Load the original document.
2
From the home screen, touch Scan > Computer.
3
Touch the name of the destination computer.
Notes:
• Make sure the scan software is installed on the destination computer.
•
Make sure the printer can communicate with the destination computer.
•
You may be prompted to enter a PIN if the computer requires it.
•
To assign a computer name and a PIN to the computer, see the Help for the printer software associated with
your operating system.
4
Select the output file type you want to create and other scan options. If necessary, touch Accept each time you
make a selection.
5
Press .
The scan is complete when a message appears on the printer control panel indicating that the file you scanned has
been saved.
Scanning a two‑sided document using the ADF
Depending on your printer model, the ADF can scan duplex (two-sided) pages in a single pass.
1
Load an original document faceup into the ADF.
2
Adjust the paper guides.
3
From the home screen, touch Scan.
4
Follow the instructions on the display, and then set the other scan options. If necessary, touch Accept each time
you make a selection.
Note: From the Sides menu in Scan Options, make sure you select 2‑Sided, and then touch Accept.
5
Press .
6
Follow the instructions on the display.
The scan is complete when a message appears on the printer control panel indicating that the file you scanned has
been saved.

Scanning to a flash drive or memory card

Before you begin, make sure your flash drive or memory card is not write‑protected.
1
Load the original document.
2
From the home screen, touch Scan > Memory Device.
Scanning
62