Lexmark Pro915 User Manual page 80

Scenario 5: Country‑ or region‑specific setup
Different countries or regions have different types of telephone wall jacks. The standard wall jack adopted by most
countries or regions is the Registered Jack-11 (RJ-11). You need to have an RJ‑11 plug, or a telephone cable that has
an RJ‑11 connector, so you can connect a device to an RJ‑11 wall jack.
The fax ports on the back of the printer and the telephone cable that comes with the printer have RJ‑11 connectors.
If you have a different type of connector in your country or region, then you may need to use an RJ‑11 adapter.
Connecting the printer to a non‑RJ‑11 wall jack
To connect:
1
Connect one end of a telephone cable to the
2
Connect the other end of the cable to the RJ‑11 adapter, and then connect the adapter to the wall jack.
EXT
LINE
port of the printer.
Faxing
80