Printer Is Printing Blank Pages - Lexmark Pro915 User Manual

3
After one minute, reconnect the power cord into the power supply, and then plug the power cord into the wall
outlet.
4
Turn on the printer.
R
EMOVE AND RECONNECT THE
C USB
HECK THE CONNECTION
1
Check the USB cable for any obvious damage. If the cable is damaged, then use a new one.
2
Firmly plug the square end of the USB cable into the back of the printer.
3
Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with
Note: If you continue to have problems, then try another USB port on the computer. You may have connected to a
defective port.
R
EMOVE AND REINSTALL THE PRINTER SOFTWARE

Printer is printing blank pages

Blank pages may be caused by improperly installed ink cartridges.
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
R
EPLACE THE INK CARTRIDGES
For more information, see "Replacing ink cartridges" on page 14.
Note: Make sure that the cartridges click firmly into their matching color slots.
C
LEAN THE PRINTHEAD NOZZLES
1
Load plain, unmarked paper.
2
From the home screen, navigate to:
> More Options
3
Touch Clean Printhead or Deep Clean Printhead.
A cleaning page prints.
A
LIGN THE PRINTHEAD
1
Load plain, unmarked paper.
2
From the home screen, navigate to:
> More Options > Align Printer
An alignment page prints.
Note: Do not remove the alignment page until printing is finished.
USB
CABLE CONNECTED TO YOUR PRINTER
.
Troubleshooting
137