Cleaning The Scanner Glass; Cleaning The Touch Screen; Moving The Printer To Another Location - Lexmark Pro915 User Manual

Cleaning the scanner glass

1
Dampen a clean, lint‑free cloth with water.
2
Gently wipe the scanner glass clean.
Note: Make sure all ink or corrective fluid on a document is dry before placing the document on the scanner glass.

Cleaning the touch screen

The touch screen of your printer control panel may need to be cleaned from time to time to remove fingerprints and
smudges.
1
Make sure the printer is turned off and unplugged from the wall outlet.
CAUTION—SHOCK HAZARD: To avoid the risk of electric shock when cleaning the exterior of the printer,
unplug the power cord from the wall outlet and disconnect all cables from the printer before proceeding.
2
Wipe the touch screen with the cloth that came with your printer or with another clean, dry, lint‑free cloth.
Warning—Potential Damage: Do not use liquids, household cleaners, or detergents, as they may damage the
touch screen.

Moving the printer to another location

When moving the printer and optional tray to another location, follow these precautions:
• Make sure the printer is turned off.
• Any cart used to move the printer must have a surface able to support the full footprint of the printer and the
dimensions of the optional tray.
•
Remove all paper from the trays.
•
Make sure the paper stop and paper trays are in their original positions.
•
Keep the printer in an upright position to prevent the ink from leaking.
• Avoid severe jarring movements.
Maintaining the printer
133