Lexmark Pro915 User Manual page 146

5
Reinsert the printhead, and then close the latch until it clicks into place.
6
Close the printer.
Note: If removing and reinserting the printhead does not resolve the error, then turn the printer off and then back
on. If the problem persists, then contact customer support.
Printhead Warning
One or more cartridges may have been missing for more than two hours since the printer was turned on.
Clean or Deep Clean the printhead to restore print quality.
A cleaning page prints.
Notes:
•
Cleaning the printhead nozzles uses ink, so clean them only when necessary.
•
Deep cleaning uses more ink, so try the Clean Printhead option first to save ink.
•
If the ink levels are too low, then you must replace the ink cartridges before you can clean the printhead
nozzles.
•
See the User's Guide for more information on how to clean the printhead nozzles.
Proxy Error
Try one or more of the following:
• Touch Set Proxy to enter the proxy settings.
•
Touch OK to clear the message.
Replace Ink Cartridge
Try one or more of the following:
•
Replace the unrecognized ink cartridge with one that is supported by your printer.
•
If a Cartridge Finder widget has been downloaded to you printer, then touch Find Ink.
The Cartridge Finder solution available in the SmartSolutions menu appears.
•
Touch OK to clear the message.
• See the User's Guide or visit the Lexmark Support Web site at http://support.lexmark.com for a list of supported
ink cartridges.
Troubleshooting
146