Changing The Sleep Timeout - Lexmark Pro915 User Manual

Use To
5 Scroll bar Scroll up and down the menu list.
6 Down arrow Scroll down.
Tips:
• Use your fingers to navigate the screen. The touch screen does not work if you use other tools or devices to
navigate.
•
Drag the scroll bar or touch the arrows until the menu or setting that you want appears on the display.
• Flick the screen by dragging your finger up or down the screen, and then lifting your finger off the screen. To
navigate to the next or previous screen, flick sideways. It will have the same effect as selecting the left or right
arrow.
• To confirm a setting or select a menu or item, touch it.
•
If necessary, touch OK or Accept after making a selection or changing a setting.
Note: All the instructions in this guide start from the home screen. If you are not on the home screen, then touch
.
For example, to navigate to Paper Type and select the default paper type setting:
1
Touch > Paper Setup > Paper Type.
Note: For select printer models with two paper trays installed, touch
and then touch Paper Type.
2
Scroll up or down (using the scroll bar or arrows, or by flicking the screen up or down) to view the list of paper
types.
3
Select a paper type setting by touching it, and then touch Accept to save the setting.

Changing the Sleep timeout

The Sleep timeout is the time it takes for the printer to switch to Sleep mode when the printer is left idle. The Sleep
feature optimizes energy efficiency by reducing the printer power consumption. To save the most energy, select the
lowest Sleep timeout.
1
From the home screen, touch
2
Select a Sleep timeout, and then touch Accept.
> Device Setup > Sleep.
Using the printer control panel buttons and menus
20
> Paper Setup, select the paper tray,