Lexmark Pro915 User Manual page 11

Use the
3 Memory card slot
4 PictBridge and USB port
5 Paper exit tray
6 Paper tray (Tray 1)
7 Paper stop
8 Printer control panel
9 ADF
19
Use the
10 Scanner unit
11 Ink cartridge access area Install, replace, or remove ink cartridges.
12 Ethernet port
13 USB port
14 LINE Port
15 EXT Port
16 Power supply with port
To
Insert a memory card.
Connect a PictBridge-enabled digital camera, a USB Bluetooth adapter, or a
flash drive to the printer.
Hold paper as it exits.
Load paper.
Catch the paper as it exits.
Operate the printer.
Scan, copy, or fax multiple‑page letter‑, legal‑, and A4‑size documents.
11
10
13
12
18
To
•
Access the ink cartridges and printhead.
•
Remove paper jams.
Connect your printer to a computer, a local network, an external DSL, or a cable
modem.
Connect the printer to a computer using a USB cable.
Warning—Potential Damage: Do not touch the USB port except when plugging in or
removing a USB cable or installation cable.
Connect the printer to an active telephone line (through a standard wall jack, DSL filter,
or VoIP adapter) to send and receive faxes.
Connect additional devices (telephone or answering machine) to the printer and the
telephone line. Use this port if you do not have a dedicated fax line for the printer, and
if this connection method is supported in your country or region.
Note: Remove the plug to access the port.
Connect the printer to a power source.
About your printer
11
14
15
<
<
16
17