Atx/At Mode Selection; Remote Power Connector; Figure 3-19: Atx/At Mode Selection; Figure 3-20: Remote Power Connector - IEI Technology DRPC-240-TGL User Manual

ATX/AT Mode Selection

AT and ATX power modes can both be used on the DRPC-240-TGL. The selection is made
through an AT/ATX switch on the top panel as shown below (Figure 3-19).

Figure 3-19: ATX/AT Mode Selection

Remote Power Connector

This remote power switch connector can be connected to an external switch for remote
control of power on and off (Figure 3-20).

Figure 3-20: Remote Power Connector

Page 40
DRPC-240-TGL Embedded System