Table of Contents
Advertisement
Figure 3-5: HDD Installation
3.7 Wi-Fi Module Installation (Optional)
The Wi-Fi module is an optional accessory. You can purchase it from IEI or other providers.
Note that you have to purchase Wi-Fi module, internal antenna and external antenna. It is
suggested to purchase an internal antenna longer than 200mm.
To install the Wi-Fi module, follow the steps below.
Step 1:
Remove the M.2 A key retention screw.
Step 2:
Insert the Wi-Fi module (IEI P/N: EMB-WIFI-KIT02I3-R10, including one Intel
AX210 wireless Bluetooth function module, two 300mm internal antennas and
two 108mm external antennas) and secure the screw.
Step 3:
Secure one end of the internal antenna to the Wi-Fi module.
Step 4:
Knock out the reserved antenna holes on the chassis, and secure the other end
of the internal antenna on the chassis.
Step 5:
Install the external antennas (Figure 3-6).
Page 30
DRPC-240-TGL Embedded System
Advertisement
Table of Contents
