Fanles s embedded s ys tem with intel 4th generation i5, pentium or celeron proces s or, vga, dvi-d, two gigabit ethernet, four usb 3.0, rs-232/422/485, rohs compliant (99 pages)
Embedded system with intel celeron n3350e/j3455e, three hdmi, dual gbe lan, rs-232/422/485, sata 6gb/s, audio jacks, usb 3.2 gen 1, rohs compliant (114 pages)
Embedded system with intel celeron j3455 processor, three hdmi, 128 gb sata dom, usb 3.2 gen 1, dual gbe, vpu accelerator, rs-232/422/485 and rohs compliant (109 pages)
Iei uibx-200-vx800 ultra compact embedded system with compactflash slot vga, gigabit ethernet, 4 x usb, 802.11b/g wireless, line out, mic, 2 x rs-232 (77 pages)
Industrial panel pc for 2nd/3rd generation intel core, pentium or celeron cpu, intel h61 express chipset, touchscreen, usb 3.0, dual gigabit lan supporting sfp fiber, ip 66 compliant front panel and rohs compliant (156 pages)
IVS-200-ULT2 Embedded System IVS-200-ULT2 Embedded System MODEL: MODEL: IVS-200-ULT2 IEI Fanless Embedded System with Intel® Core™ i5-5350U/Celeron® 3755U Processor, Quad GbE LAN, HDMI, Dual RS-232/422/485, USB 3.0, RoHS Compliant, User Manual Page i Rev. 1.01 – June 30, 2017...
Page 2
IVS-200-ULT2 Embedded System Revision Date Version Changes June 30, 2017 1.01 Modified Ethernet connectors (LAN1~LAN4) pinouts September 17, 2015 1.00 Initial release Page ii...
Page 3
IVS-200-ULT2 Embedded System Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
IVS-200-ULT2 Embedded System Manual Conventions WARNING Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. CAUTION Cautionary messages should be heeded to help reduce the chance of losing data or damaging the product.
IVS-200-ULT2 Embedded System Table of Contents 1 INTRODUCTION......................1 1.1 O ........................2 VERVIEW 1.2 B ........................2 ENEFITS 1.3 F ........................3 EATURES 1.4 M ....................3 ODEL ARIATIONS 1.5 E ....................4 XTERNAL VERVIEW 1.5.1 Front Panel ......................4 1.5.2 Rear Panel ......................
Page 6
IVS-200-ULT2 Embedded System 3.10 RS-232/422/485 S ............30 ERIAL ONNECTION 3.11 M ..................31 OUNTING THE YSTEM 3.11.1 Mounting with Mounting Brackets..............31 3.11.2 Mounting with VESA Mount Kit (Optional) ........... 32 3.12 P ..................35 OWER ROCEDURE 3.12.1 Installation Checklist ..................35 3.12.2 Terminal Block Pinouts ..................
Page 7
IVS-200-ULT2 Embedded System 4.4.2 PCH-IO Configuration ..................65 4.4.2.1 PCI Express Configuration ............... 66 4.4.2.2 PCH Azalia Configuration ................ 67 4.5 S ......................... 68 ECURITY 4.6 B ........................69 4.7 S & E ......................71 5 TROUBLESHOOTING AND MAINTENANCE ............. 73 5.1 IVS-200-ULT2 S...
Page 8
IVS-200-ULT2 Embedded System B SAFETY PRECAUTIONS ..................90 B.1 S ..................... 91 AFETY RECAUTIONS B.1.1 General Safety Precautions ................91 B.1.2 Anti-static Precautions ..................92 B.1.3 Product Disposal ..................... 93 B.2 M ............94 AINTENANCE AND LEANING RECAUTIONS B.2.1 Maintenance and Cleaning................94 B.2.2 Cleaning Tools ....................
Page 9
IVS-200-ULT2 Embedded System List of Figures Figure 1-1: IVS-200-ULT2 Series Embedded System..............2 Figure 1-2: Front Panel ........................4 Figure 1-3: Rear Panel........................5 Figure 1-4: Bottom Surface ......................6 Figure 1-5: Dimensions (mm) ......................9 Figure 3-1: Bottom Cover Retention Screws ................18 Figure 3-2: Opening Bottom Cover.....................18 Figure 3-3: Clear CMOS Button....................19...
Page 10
IVS-200-ULT2 Embedded System Figure 3-27: Tighten Retention Screw ..................34 Figure 3-28: Terminal Block Pinouts ..................35 Figure 3-29: Power Button and Power LED ................36 Figure 5-1: SO-DIMM Location ....................77 Figure 5-2: SO-DIMM Installation ....................77 Figure 6-1: Jumper and Connector Locations................79 Page x...
Page 12
IVS-200-ULT2 Embedded System List of BIOS Menus BIOS Menu 1: Main ........................42 BIOS Menu 2: Advanced ......................43 BIOS Menu 3: CPU Configuration ....................44 BIOS Menu 4: ACPI Settings .......................47 BIOS Menu 5: F81866 Super IO Configuration ................48 BIOS Menu 6: Serial Port n Configuration Menu...............48 BIOS Menu 7: RTC Wake Settings ....................52...
Intel® Celeron® processor 3755U. It is designed for vehicle applications that require minimum installation space. The IVS-200-ULT2 accepts a wide range of DC power input (9 V–36 V), allowing it to be powered anywhere. Wi-Fi and WWAN capabilities plus four RJ-45 Ethernet connectors ensure smooth connection of the system to an external LAN.
Optional 802.11b/g/n 1T1R wireless connection 1.4 Model Variations There are two models in the IVS-200-ULT2 embedded system series. The two models are all preinstalled with 4 GB of DDR3 memory. The model variations are listed in T able 1-1 6 5 4 below.
The IVS-200-ULT2 RoHS compliant, fanless embedded system features industrial grade components that offer longer operating life, high shock/vibration resistance and endurance over a wide temperature range. The IVS-200-ULT2 combines these features in an aluminum enclosure, offering system integrators and developers the best selection of robust and high performance computing system platforms for vehicle applications.
IVS-200-ULT2 Embedded System 1.5.2 Rear Panel The rear panel of the IVS-200-ULT2 provides access to the following external I/O connectors. 1 x 9 V–36 V DC power input terminal block 4 x RJ-45 Ethernet connector 4 x D-sub reserved ports (for RS-232 or digital I/O) ...
The bottom surface of the IVS-200-ULT2 contains four foot pads which can be removed to install two side mounting brackets. The surface also has four retention screw holes for the VESA MIS-D 100 wall-mount kit.
IVS-200-ULT2 Embedded System 1.6 Technical Specifications The specifications for the Intel based embedded systems are listed below. IVS-200-ULT2 Intel® Core™ i5-5350U (dual-core, 1.8 GHz, 15W TDP) CPU (SoC) Intel® Celeron® 3755U (dual-core, 1.7 GHz, 15W TDP) System Memory 2 x 204-pin DDR3 SO-DIMM slot (system max. 16 GB) Preinstalled one 4.0 GB DDR3 SDRAM SO-DIMM...
IVS-200-ULT2 Embedded System Extruded aluminum alloy Chassis Construction 9 V–36 V (±0.3 V) DC Power Input One power input terminal block Power Consumption 12V@2.1A (with Intel® Core™ i5-5350U processor and one 4 GB DDR3 memory) Operating Shock Half-sine wave shock 5G; 11ms; 3 shocks per axis Operating Vibration MIL-STD-810F 514.5C-2 (with SSD)
IVS-200-ULT2 Embedded System 1.7 Dimensions The dimensions of the IVS-200-ULT2 are listed below and shown in F igure 1-5. 6 5 4 Figure 1-5: Dimensions (mm) Page 9...
Contact the IEI reseller or vendor the IVS-200-ULT2 was purchased from or contact an IEI sales representative directly by sending an email to ales@ieiworld.com. The IVS-200-ULT2 embedded system is shipped with the following components: Quantity Item Image...
IVS-200-ULT2 Embedded System Screws (M3*4) for SSD installation Screws (M3*8) for mounting brackets Mounting brackets Driver and manual CD One Key Recovery CD Table 2-1: Package List 2.3 Optional Items The following are optional component(s) which may be separately purchased:...
Electrostatic discharge (ESD) can cause serious damage to electronic components, including the WAFER series motherboard and the power module. (Dry climates are especially susceptible to ESD.) It is therefore critical that whenever the IVS-200-ULT2 is opened and any electrical component handled, the following anti-static precautions are strictly adhered to.
Air Circulation: Make sure there is sufficient air circulation when installing the IVS-200-ULT2. The IVS-200-ULT2’s cooling vents must not be obstructed by any objects. Blocking the vents can cause overheating of the IVS-200-ULT2. Leave at least 5 cm of clearance around the IVS-200-ULT2 to prevent overheating. ...
IVS-200-ULT2 Embedded System 3.3 Installation Procedure To properly install the IVS-200-ULT2, the following steps must be followed. Detailed descriptions of these instructions are listed in the sections that follow. Unpacking Step 1: Configure the jumper settings Step 2: Install a SATA SSD...
3.5.1 Clear CMOS If the IVS-200-ULT2 fails to boot due to improper BIOS settings, the clear CMOS button clears the CMOS data and resets the system BIOS information. To do this, push the clear CMOS button for three seconds, and then restart the system. The clear CMOS button location is shown in F igure 3-3.
After having done one of the above, save the changes and exit the CMOS Setup menu. 3.5.2 AT/ATX Mode Selection AT or ATX power mode can be used on the IVS-200-ULT2. The selection is made through an AT/ATX switch located on the rear panel (Figure 3-4).
IVS-200-ULT2 Embedded System 3.6 Solid-State Drive Installation One 2.5” SATA drive can be installed in the IVS-200-ULT2. The SATA drive is installed into a removable hard drive bracket on the front panel. To install the SSD into the system, please follow the steps below.
IVS-200-ULT2 Embedded System Figure 3-8: SSD Retention Screws Carefully insert the SSD bracket into the slot on the front panel. Make sure the Step 4: SATA connector on the SSD is securely connected to the SATA connector inside the chassis.
IVS-200-ULT2 Embedded System 3.7 mSATA/Full-size PCIe Mini Card Installation The PCIe Mini slot allows installation of either a full-size or half-size PCIe Mini card. To install a full-size PCIe Mini card or an mSATA module, please follow the steps below.
IVS-200-ULT2 Embedded System Figure 3-11: Removing the Screw and Standoff for Half-size PCIe Mini Card Remove the retention screw. Remove the retention screw as shown in Step 4: Figure 3-12. Figure 3-12: Removing the Retention Screw Insert into the socket at an angle. Line up the notch on the card with the notch Step 5: on the slot.
IVS-200-ULT2 Embedded System Figure 3-13: Inserting the Full-size PCIe Mini Card into the Slot at an Angle Secure the full-size PCIe Mini card. Secure the full-size PCIe Mini card with Step 6: the retention screw previously removed (Figure 3-14). Figure 3-14: Securing the Full-size PCIe Mini Card...
Step 1: Remove one of the two knockout holes for antenna installation. The knockout Step 2: holes are located on the rear panel of the IVS-200-ULT2 as shown in Figure 3-15. Figure 3-15: Knockout Holes for External Antenna Step 3: Locate the PCIe Mini slot (Figure 3-16).
IVS-200-ULT2 Embedded System Figure 3-17: Removing the Retention Screw Insert into the socket at an angle. Line up the notch on the WLAN/WWAN Step 5: module with the notch on the slot. Slide the WLAN/WWAN module into the slot at an angle of about 20º (Figure 3-18).
IVS-200-ULT2 Embedded System Figure 3-19: Securing WLAN/WWAN Module and Connecting RF Cable Remove the nut and washer from the SMA connector at the other end of the Step 8: RF cable. Insert the SMA connector to the antenna connector hole on the rear panel.
3.9 SIM Card Installation (Optional) To be able to use the 3G network connection, a SIM card must be installed in the IVS-200-ULT2. Follow the steps below to install a SIM card. Open the bottom cover. See Section 3.4. Step 1: Install a WWAN module into the IVS-200-ULT2.
Close the slot cover and lock it. 3.10 RS-232/422/485 Serial Port Connection The rear panel of the IVS-200-ULT2 has two D-sub 9 male connectors for RS-232/422/485 connection. The serial communication mode selection can be made through the BIOS options. Please refer to Section 4.3.3.1 for detail information. The pinouts of the D-sub 9 connector are listed below.
IVS-200-ULT2 Embedded System 3.11 Mounting the System There are two ways to mount the IVS-200-ULT2. The mounting instructions are described below. 3.11.1 Mounting with Mounting Brackets To mount the embedded system onto a wall or some other surface using the two mounting brackets, please follow the steps below.
IVS-200-ULT2 Embedded System Figure 3-24: Mounting Bracket Retention Screws Drill holes in the intended installation surface. Step 5: Align the mounting holes in the sides of the mounting brackets with the predrilled Step 6: holes in the mounting surface. Insert four retention screws, two in each bracket, to secure the system to the Step 7: wall.
Figure 3-26: Mount the Embedded System Tighten the top screw on the wall mounting kit to securely hold the Step 9: IVS-200-ULT2 in place (Figure 3-27). After this screw is tightened, the IVS-200-ULT2 should not be able to move. Figure 3-27: Tighten Retention Screw...
The power cables are plugged in The system is securely mounted 3.12.2 Terminal Block Pinouts The IVS-200-ULT2 has a 9 V–36 V power input terminal block. The terminal block pinouts are shown in F igure 3-28. 7 6 4...
Visit the IEI website or contact technical support for the latest updates. All the drivers for the IVS-200-ULT2 are on the utility CD that came with the system. The following drivers can be installed on the system: ...
Page 49
IVS-200-ULT2 Embedded System Insert the utility CD into a CD drive connected to the system and install all of the necessary drivers for the IVS-200-ULT2. Page 37...
IVS-200-ULT2 Embedded System 4.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. NOTE: Some of the BIOS options may vary throughout the life cycle of the product and are subject to change without prior notice.
IVS-200-ULT2 Embedded System Function Decrease the numeric value or make changes Page up Move to the next page Page down Move to the previous page Main Menu – Quit and do not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu --...
IVS-200-ULT2 Embedded System Save & Exit – Selects exit options and loads default settings The following sections completely describe the configuration options found in the menu items at the top of the BIOS screen and listed above. 4.2 Main The Main BIOS menu ( B IOS Menu 1) appears when the BIOS Setup program is entered.
IVS-200-ULT2 Embedded System System Date [Mon 08/17/2015] System Time [11:10:27] Version 2.17.1245. Copyright (C) 2015 American Megatrends, Inc. BIOS Menu 1: Main The Main menu has two user configurable fields: System Date [xx/xx/xx] Use the System Date option to set the system date. Manually enter the day, month and year.
IVS-200-ULT2 Embedded System 4.3 Advanced Use the Advanced menu ( B IOS Menu 2) to configure the CPU and peripheral devices through the following sub-menus: WARNING! Setting the wrong values in the sections below may cause the system to malfunction. Make sure that the settings made are compatible with the hardware.
IVS-200-ULT2 Embedded System 4.3.1 CPU Configuration Use the CPU Configuration menu ( B IOS Menu 3) to view detailed CPU specifications and configure the CPU. Aptio Setup Utility – Copyright (C) 2015 American Megatrends, Inc. Advanced CPU Configuration Enabled for Windows XP and Linux (OS optimized for Intel(R) Core(R) i7-5650U CPU @ 2.20GHz...
IVS-200-ULT2 Embedded System Processor Cores: Lists the number of the processor core Intel HT Technology: Indicates if Intel HT Technology is supported by the CPU. Intel VT-x Technology: Indicates if Intel VT-x Technology is supported by the ...
IVS-200-ULT2 Embedded System Intel Virtualization Technology [Enabled] Use the Intel Virtualization Technology option to enable or disable virtualization on the system. When combined with third party software, Intel® Virtualization technology allows several OSs to run on the same system at the same time.
IVS-200-ULT2 Embedded System 4.3.2 ACPI Settings The ACPI Settings menu ( B IOS Menu 4) configures the Advanced Configuration and Power Interface (ACPI) options. Aptio Setup Utility – Copyright (C) 2015 American Megatrends, Inc. Advanced ACPI Settings Select the highest ACPI...
IVS-200-ULT2 Embedded System 4.3.3 F81866 Super IO Configuration Use the F81866 Super IO Configuration menu ( B IOS Menu 5) to set or change the configurations for the serial ports. Aptio Setup Utility – Copyright (C) 2015 American Megatrends, Inc.
IVS-200-ULT2 Embedded System 4.3.3.1.1 Serial Port 1 Configuration Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port. Disable the serial port Disabled Enable the serial port Enabled EFAULT Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address.
IVS-200-ULT2 Embedded System Serial Port Mode [RS232] Use the Serial Port Mode option to select the Serial Port 1 signaling mode. Serial Port 1 signaling mode is RS-232 RS232 EFAULT Serial Port 1 signaling mode is RS-422 RS422 ...
IVS-200-ULT2 Embedded System Serial Port I/O port address is 3E8h and the interrupt IO=3E8h; address is IRQ3, 4, 7, 9, 10, 11 IRQ=3, 7, 9, 10, 11 Serial Port I/O port address is 2E8h and the interrupt IO=2E8h;...
IVS-200-ULT2 Embedded System 4.3.4 RTC Wake Settings The RTC Wake Settings menu (BIOS Menu 7) enables the system to wake at the specified time. Aptio Setup Utility – Copyright (C) 2015 American Megatrends, Inc. Advanced Wake system with Fixed Time...
IVS-200-ULT2 Embedded System Wake up minute Wake up second After setting the alarm, the computer turns itself on from a suspend state when the alarm goes off. 4.3.5 Serial Port Console Redirection The Serial Port Console Redirection menu ( B IOS Menu 8) allows the console redirection options to be configured.
IVS-200-ULT2 Embedded System 4.3.5.1 Console Redirection Settings Use the Console Redirection Settings menu ( B IOS Menu 9) to configure console redirection settings of the specified serial port. This menu appears only when the Console Redirection is enabled. Aptio Setup Utility – Copyright (C) 2015 American Megatrends, Inc.
IVS-200-ULT2 Embedded System Sets the serial port transmission speed at 9600. 9600 Sets the serial port transmission speed at 19200. 19200 Sets the serial port transmission speed at 39400. 38400 Sets the serial port transmission speed at 57600.
IVS-200-ULT2 Embedded System Sets the number of stop bits at 1. EFAULT Sets the number of stop bits at 2. 4.3.6 iEi Feature Use the iEi Feature menu (BIOS Menu 10) to configure One Key Recovery function. Aptio Setup Utility – Copyright (C) 2015 American Megatrends, Inc.
IVS-200-ULT2 Embedded System 4.3.7 SATA Configuration Use the SATA Configuration menu ( B IOS Menu 11) to change and/or set the configuration of the SATA devices installed in the system. Aptio Setup Utility – Copyright (C) 2015 American Megatrends, Inc.
IVS-200-ULT2 Embedded System Hot Plug [Disabled] Use the Hot Plug option to enable or disable the hot plug function of the SATA port. Disables the hot plug function of the SATA port. Disabled EFAULT Enables the hot plug function of the SATA port.
IVS-200-ULT2 Embedded System 4.3.9 USB Configuration Use the USB Configuration menu ( B IOS Menu 13) to read USB configuration information and configure the USB settings. Aptio Setup Utility – Copyright (C) 2015 American Megatrends, Inc. Advanced USB Configuration Enables Legacy USB support.
IVS-200-ULT2 Embedded System Legacy USB support enabled Enabled EFAULT Legacy USB support disabled Disabled Legacy USB support disabled if no USB devices are Auto connected 4.3.10 iWDD H/W Monitor The iWDD H/W Monitor menu ( B IOS Menu 14) displays operating temperature and fan speeds.
IVS-200-ULT2 Embedded System DCIN_R +V3.3S 4.4 Chipset Use the Chipset menu ( B IOS Menu 15) to access the PCH-IO and System Agent (SA) configuration menus. WARNING! Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction.
IVS-200-ULT2 Embedded System 4.4.1 System Agent (SA) Configuration Use the System Agent (SA) Configuration menu ( B IOS Menu 16) to configure the System Agent (SA) parameters. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Chipset VT-d Capability...
IVS-200-ULT2 Embedded System 4.4.1.1 Graphics Configuration Use the Graphics Configuration submenu (BIOS Menu 17) to configure the graphics settings. Aptio Setup Utility – Copyright (C) 2015 American Megatrends, Inc. Chipset Graphics Configuration Select the Video Device which will be activated...
IVS-200-ULT2 Embedded System 32 MB of memory used by internal graphics device 64 MB of memory used by internal graphics device 128 MB of memory used by internal graphics 128M device 256 MB of memory used by internal graphics...
IVS-200-ULT2 Embedded System 4.4.2 PCH-IO Configuration Use the PCH-IO Configuration menu (BIOS Menu 19) to configure the PCH parameters. Aptio Setup Utility – Copyright (C) 2015 American Megatrends, Inc. Chipset Auto Power Button Function [Disabled(ATX)] Select AC power state Restore AC Power Loss...
IVS-200-ULT2 Embedded System Power saving function is disabled. Disabled EFAULT Power saving function is enabled. It will reduce power Enabled consumption when the system is off. 4.4.2.1 PCI Express Configuration Use the PCI Express Configuration submenu (BIOS Menu 20) to configure the PCI Express slots.
IVS-200-ULT2 Embedded System Disables to detect if a non-compliance PCI Disabled EFAULT Express device is connected to the PCI Express slot. Enables to detect if a non-compliance PCI Express Enabled device is connected to the PCI Express slot.
IVS-200-ULT2 Embedded System The High Definition Audio controller is disabled. Disabled The High Definition Audio controller is enabled. Enabled EFAULT The High Definition Audio controller is automatically Auto detected and enabled. 4.5 Security Use the Security menu (BIOS Menu 22) to set system and user passwords.
IVS-200-ULT2 Embedded System 4.6 Boot Use the Boot menu ( B IOS Menu 23) to configure system boot options. Aptio Setup Utility – Copyright (C) 2015 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit Boot Configuration Select the keyboard...
IVS-200-ULT2 Embedded System Quiet Boot [Enabled] Use the Quiet Boot BIOS option to select the screen display when the system boots. Normal POST messages displayed Disabled OEM Logo displayed instead of POST messages Enabled EFAULT Launch PXE OpROM [Disabled] Use the Launch PXE OpROM option to enable or disable boot option for legacy network devices.
IVS-200-ULT2 Embedded System 4.7 Save & Exit Use the Save & Exit menu ( B IOS Menu 24) to load default BIOS values, optimal failsafe values and to save configuration changes. Aptio Setup Utility – Copyright (C) 2015 American Megatrends, Inc.
IVS-200-ULT2 Embedded System Restore User Defaults Use the Restore User Defaults option to restore the user defaults to all the setup options. Page 72...
Failure to follow these instructions may lead to personal injury and system damage. To preserve the working integrity of the IVS-200-ULT2 embedded system, the system must be properly maintained. If embedded system components need replacement, the proper maintenance procedures must be followed to ensure the system can continue to operate normally.
If all troubleshooting measures have been taken and the system still fails to start, contact the IEI reseller or vendor you purchased the IVS-200-ULT2 from or contact an IEI sales representative directly. To contact an IEI sales representative, please send an email to ales@ieiworld.com.
To replace a SO-DIMM memory module into a SO-DIMM socket, please follow the steps below. Open the bottom cover. Place the IVS-200-ULT2 on an anti-static pad with the Step 1: bottom panel facing up and the bottom cover opened (see Section 3 .4).
IVS-200-ULT2 Embedded System Figure 5-1: SO-DIMM Location Remove the SO-DIMM by releasing the arms on the SO-DIMM socket. Step 3: Align the new SO-DIMM with the socket. The SO-DIMM must be oriented in Step 4: such a way that the notch in the middle of the SO-DIMM must be aligned with the plastic bridge in the socket ( F igure 5-2).
IVS-200-ULT2 Embedded System 6.1 Peripheral Interface Connectors The IVS-200-ULT2 embedded system motherboard comes with a number of peripheral interface connectors and configuration jumpers. The connector locations are shown in F igure 6-1. The Pin 1 locations of the on-board connectors are also indicated in the diagram below.
IVS-200-ULT2 Embedded System Appendix Regulatory Compliance Page 85...
Page 98
IVS-200-ULT2 Embedded System DECLARATION OF CONFORMITY This equipment is in conformity with the following EU directives: EMC Directive 2004/108/EC Low-Voltage Directive 2006/95/EC RoHS II Directive 2011/65/EU If the user modifies and/or install other devices in the equipment, the CE conformity declaration may no longer apply.
Page 99
IVS-200-ULT2 Embedded System Español [Spanish] IEI Integration Corp declara que el equipo cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Ελληνική [Greek] IEI Integration Corp ΔΗΛΩΝΕΙ ΟΤΙ ΕΞΟΠΛΙΣΜΟΣ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ...
Page 100
IVS-200-ULT2 Embedded System Româna [Romanian] IEI Integration Corp declară că acest echipament este in conformitate cu cerinţele esenţiale şi cu celelalte prevederi relevante ale Directivei 1999/5/CE. Slovensko [Slovenian] IEI Integration Corp izjavlja, da je ta opreme v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.
Page 101
IVS-200-ULT2 Embedded System FCC WARNING This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference ...
Electric shocks can occur if the IVS-200-ULT2 chassis is opened when it is running. To avoid risk of electric shock, this device must only be connected to a supply mains with protective earth.
Electrostatic discharge (ESD) can cause serious damage to electronic components, including the IVS-200-ULT2. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the IVS-200-ULT2 is opened and any of the electrical components are handled, the following anti-static precautions are strictly adhered to.
IVS-200-ULT2 Embedded System B.1.3 Product Disposal CAUTION: Risk of explosion if battery is replaced by an incorrect type. Only certified engineers should replace the on-board battery. Dispose of used batteries according to instructions and local regulations. Outside the European Union–If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authority so as to comply with the correct disposal method.
Always make sure your hands are dry when unplugging the power cable. B.2.1 Maintenance and Cleaning Prior to cleaning any part or component of the IVS-200-ULT2, please read the details below. Never spray or squirt liquids directly onto any other components.
Page 107
IVS-200-ULT2 Embedded System Using solvents–The use of solvents is not recommended when cleaning the device as they may damage the plastic parts. Vacuum cleaner–Using a vacuum specifically designed for computers is one of the best methods of cleaning the device. Dust and dirt can restrict the airflow in the device and cause its circuitry to corrode.
IVS-200-ULT2 Embedded System C.1 BIOS Configuration Options Below is a list of BIOS configuration options described in Chapter 4. System Date [xx/xx/xx] ......................42 System Time [xx:xx:xx] .......................42 Hyper-threading [Enabled]....................45 Active Processor Cores [All] ....................45 Intel Virtualization Technology [Enabled] .................46 ...
Page 110
IVS-200-ULT2 Embedded System DVMT Pre-Allocated [256M] ....................63 DVMT Total Gfx Mem [MAX]....................64 Restore AC Power Loss [Last State] .................65 Power Saving Function(EUP) [Disabled]................65 PCIe Speed [Auto]........................66 Detect Non-Compliance Device [Disabled] ...............66 Azalia(HD Audio) [Enabled] ....................67 ...
IVS-200-ULT2 Embedded System Appendix Watchdog Timer Page 99...
Page 112
IVS-200-ULT2 Embedded System NOTE: The following discussion applies to DOS environment. IEI support is contacted or the IEI website visited for specific drivers for more sophisticated operating systems, e.g., Windows and Linux. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash.
IVS-200-ULT2 Embedded System NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets. Example program: ; INITIAL TIMER PERIOD COUNTER W_LOOP: AX, 6F02H ;setting the time-out value BL, 30 ;time-out value is 48 seconds ;...
IVS-200-ULT2 Embedded System Appendix Hazardous Materials Disclosure Page 102...
Page 115
IVS-200-ULT2 Embedded System The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.