At/Atx Mode Selection; At Power Mode; Figure 3-14: At/Atx Switch Location - IEI Technology ITG-100AI User Manual

ITG-100AI Embedded System

3.7 AT/ATX Mode Selection

AT or ATX power mode can be used on the ITG-100AI. The selection is made through an
AT/ATX switch located on the front panel (Figure 3-14). To select AT mode or ATX mode,
follow the steps below.
Step 1: Locate the AT/ATX switch on the front panel (Figure 3-14).

Figure 3-14: AT/ATX Switch Location

Step 2: Adjust the AT/ATX switch.

3.7.1 AT Power Mode

With the AT mode selected, the power is controlled by a central power unit rather than a
power switch. The ITG-100AI panel PC turns on automatically when the power is
connected. The AT mode benefits a production line to control multiple panel PCs from a
central management center and other applications including:
ATM

Self-service kiosk

Plant environment monitoring system

Factory automation platform

Manufacturing shop flow

Step 0:
Page 21