Laser Safety; North America; Europe (Eu) - Xerox 770 Safety Manual

Laser safety

North America

This product complies with safety standards and is certified as a Class 1 Laser product
under the Center for Devices and Radiological Health (CDRH) of the United States Food
and Drug Administration (FDA) implemented regulations for laser products. This product
complies with FDA performance standards for Laser products except for deviations
pursuant to Laser Notice No. 50 dated June 24, 2007. These regulations apply to laser
products marketed in the United States. The label on the machine indicates compliance
with CDRH regulations and must be attached to laser products marketed in the United
States. This product does not emit hazardous laser radiation.
LASER WARNING
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous exposure of laser light.
Since radiation emitted inside this product is completely confined within the protective
housing and external covers, the laser beam cannot escape from the machine during
any phase of the user operation.
This product contains laser warning labels. These labels are intended for use by the Xerox
Service Representative and are placed on or near panels or shields that require special
tools for removal. Do not remove any of the panels. There are no operator serviceable
areas in these covers.

Europe (EU)

This product complies with IEC s safety standard 60825-1 (Edition 1.2) issued August
2001.
The equipment complies with laser product performance standards set by governmental,
national, and international agencies as a Class 1 Laser Product. It does not emit hazardous
radiation as the beam is totally enclosed during all phases of customer operation and
maintenance.
WARNING
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
This product contains laser warning labels. These labels are intended for use by the Xerox
Service Representative and are placed on or near panels or shields that require special
tools for removal. Do not remove any of the panels. There are no operator serviceable
areas in these covers.
If you need additional safety information concerning the product or Xerox supplied
materials, you may call the following number: +44 (0) 1707 353434
®
Xerox 770 Digital Color Press
Safety Guide
Safety information
2-3