5. BASIC OPERATION
Meas Mode screen
Measuring screen
Input screen
* 1 Distance
Switching distance display status: "25.2 Configuration -Config Mode-"
S : Slope distance
H : Horizontal distance
V : Height difference
* 2 Vertical angle
Switching vertical angle display status: "25.2 Configuration -Config Mode-"
ZA : Zenith angle (Z=0)
VA : Vertical angle (H=0 / H=±90)
To switch vertical angle/slope in %, press [ZA/%]
* 3 Horizontal angle
Press [R/L] to switch the display status.
HAR: Horizontal angle right
HAL: Horizontal angle left
20
F i n e
Laser is emited *8
OK
-pointer
/ Guide light
Previous page
9
A
Input mode *9
Next page
6