25. CHANGING THE SETTINGS
3. Input new password twice and
press {
}. The password is
changed and <Config> is
restored.
• If no password was input as new
password and {
pressed, no password is set.
• Input range of password: 3 or more characters and 8 or fewer characters
25.5
Restoring Default Settings
The following explains the two methods of restoring default settings:
Restoring set items to initial settings and turning power on. Initializing the data
and turning power on.
• Restore the following items to the initial settings when the SET was shipped.
EDM setting, Config mode settings (including softkey arrays)
About initial settings when the SET was shipped, "25.1 EDM Settings",
"25.3 Allocating Key Functions".
• Initialize the data. The following data is initialized.
Data within all jobs
Known point data within memory
Code data within memory
PROCEDURE Restoring set items to initial settings and turning power on
1. Turn the power off.
2. While pressing {F4} and {BACK
SPACE}, press {ON}.
3. The SET is turned on, "Default
set" appears on the screen and all
items are restored to their initial
settings.
130
} was
C h a n g e p a s s w o r d
N e w p a s s w o r d
N e w p a s s w o r d a g a i n