• When
• If no key operations are performed for two minutes, the display automatically
returns to the Meas mode screen.
11.2
Distance and Angle Measurement
An angle can be measured at the same time as the distance.
PROCEDURE
1. Sight the target.
2. In the first page of Meas Mode,
press [DIST] to start distance
measurement.
When measurement starts, EDM
information (distance mode, prism
constant correction value,
atmospheric correction factor) is
represented by a flashing light.
A short beep sounds, and the
measured distance data (S),
vertical angle (ZA), and horizontal
angle (HAR) are displayed.
is displayed persistently, contact your Sokkia agent.
11. DISTANCE MEASUREMENT
F i n e
37