Sokkia 130R Series Operator's Manual page 79

4. Press [YES] to use the
measurement results.
Displays the difference between
the measured point and the
baseline.
• Offline: A positive value
indicates the point is on the right
of the baseline and a negative
value indicates it is on the left.
• "Cut" indicates that the point is
below the baseline.
• "Fill" indicates that the point is
above the baseline.
• Lenght: Distance along the
baseline from the first point to
the measured point.
• Press [NO] to observe the target
again.
5. Sight the next target and press
[OBS] to continue the
measurement.
• Press [REC]: records
measurement results.
Recording method:
"20. RECORDING DATA -
RECORD MENU -"
15. SETTING-OUT LINE
Set-out line
Tgt.h
S e t - o u t l i n e
- 0 . 0 0 4 m
Offline
Cut 0 . 0 0 6 m
1 2 . 9 1 7 m
Length
R E C
1.400m
NO YES
O B S
71