[OFFSET]
: Offset measurement
[REC]
: To Record menu
[EDM]
: Setting EDM
[H.ANG]
: Set required horizontal angle
[MENU]
: To Menu mode (Coordinates measurement, setting-out
measurement, offset measurement, repetition measurement,
missing line measurement, REM measurement, resection
measurement, surface area measurement, set-out line, point
projection)
[REM]
: REM measurement
[RESEC]
: Resection measurement
[R/L]
: Select horizontal angle right/left
[ZA / %]
: Switch between zenith angle/slope in %
[HOLD]
: Hold horizontal angle/release horizontal angle
[RCL]
: Display final measurement data
[D_OUT]
: Output measurement results to an external instrument
[AREA]
: Surface area measurement
[F/M]
: Switch between meters/feet
[HT]
: Set the instrument station height and target height
[S-O LINE] : Setting-out line measurement
[P-PROJ]
: Point projection measurement
[---]
: No functions set
Softkey Allocation Examples
It is possible to allocate the same key to each page (example 1). The same
function can be allocated to more than one key on the same page (example 2).
And it is also possible to allocate a function to only one key (example 3).
Allocation example 1:
P1 [DIST] [
SHV] [H.ANG] [EDM]
P2 [DIST] [
SHV] [H.ANG] [EDM]
Allocation example 2:
P1 [DIST] [DIST] [
Allocation example 3:
P1 [DIST] [
SHV] [– – –] [– – –]
SHV] [
SHV]
25. CHANGING THE SETTINGS
127