3. Select "Stn Orientation," then
"Stn coordinate."
Input the instrument station
coordinates, instrument height and
target height.
• When you wish to read in the
registered coordinate data,
press [READ].
"PROCEDURE Reading in
Registered Coordinate Data"
4. Press [OK] to set the input values.
<Coord> is displayed again.
• When [REC] is pressed,
instrument station data is saved.
"20. RECORDING DATA -
RECORD MENU -"
12. COORDINATE MEASUREMENT
Coord.
Stn. Orientation
Observation
EDM
R E A D
R E C
R E C
0 . 0 0 0
O K
O K
43