3. Press {5} three times.
"O" is displayed.
4. Press {7} twice.
"B" is displayed.
5. Press {SPACE} once.
Input a blank space.
6. Press {5} once.
"M" is displayed. Press {
complete inputting.
Selecting options
{ } / { }
{ } / { }
{
}
Example: Select a reflector type
1. Press [EDM] in page 2 of Meas mode.
2. Move to "Reflector" using { } / { }.
3. Display the option you want to
select using { } / { }.
Switches between "Prism", "Sheet"
and "None."
4. Press {
} or { } to move to
the next option.
The selection is set and you can
set the next item.
Switching modes
{CNFG}
[MEAS]
[MEM]
{ESCAPE}
"4.2 Mode Diagram"
} to
Up and down cursor
Right and left cursor / Select other option
Accept the option
Illum.hold: Laser
From Status mode to Config Mode
(Configuration Mode)
From Status mode to Meas Mode
(Measurement Mode)
From Status mode to Memory Mode
Return to the Status mode from each Mode
5. BASIC OPERATION
M
17