Recording Data - Record Menu; Recording Instrument Station Data - Sokkia 130R Series Operator's Manual

20. RECORDING DATA - RECORD MENU -

In Record menu, you can store the measurement data (distance, angle,
coordinates), station point data and note in the current JOB.
"21. SELECTING / DELETING A JOB"
• A total of 10000 data can be stored inside the instrument.
• If the same point number is input, the following screen is displayed.
Press [YES] to overwrite the present point.
Press [NO] to input a new name.
Press [ADD] to record the point as another record with the same name.
20.1

Recording Instrument Station Data

Instrument station data can be stored in the current JOB.
• The items that can be recorded are the instrument station coordinates, point
number, instrument height, codes, operator, date, time, weather, wind,
temperature, air pressure and atmospheric correction factor.
• If instrument station data is not stored for the current JOB, the previously stored
instrument data settings will be used.
PROCEDURE
1. Press [REC] in the third page of
Meas mode to display <REC>.
• Current JOB name is displayed.
2. Select "Stn data".
• Select [READ] to recall and use
the registered coordinates.
"12.1 Entering Instrument
Station Data, PROCEDURE
Reading in Registered
Coordinate Data".
A D D
REC
Stn data
Angle data
Dist data
Coord data
Dist + Coord data
89