Recording Angle Measurement Data - Sokkia 130R Series Operator's Manual

20.2

Recording Angle Measurement Data

Angle measurement data can be stored in the current JOB.
• It is convenient to use [AUTO] to perform automatic operation from angle
measurement to recording.
PROCEDURE
1. Press [REC] in the third page of
Meas mode to display <REC>.
2. Select "Angle data" and sight the
point to be recorded.
Angle measurement values are
displayed in real time.
3. Press [REC], and set the following
items.
(1) Code
(2) Target height
(3) Point number
4. Check the input data, then press
[OK].
5. To continue measurement, sight
the next point, then perform steps
3 and 4 above.
20. RECORDING DATA - RECORD MENU -
REC
Stn data
Angle data
Dist data
Coord data
Dist + Coord data
1 0 1 0
C d
.
.
91