Angle Measurement And Outputting The Data - Sokkia 130R Series Operator's Manual

10. ANGLE MEASUREMENT
• Return to the previous
measurement of the first target
and redo it: [CE].
(Effective when the display
shows "Take BS")
6. When continuing the repetition
measurement, repeat steps 4 to 5.
7. When the repetition measurement
is completed, press {ESCAPE}.
• It is also possible to perform repetition measurement when [REP] on Meas
mode screen.
Allocating [REP]:"25.3 Allocating Key Functions"
10.4

Angle Measurement and Outputting the Data

The following explains angle measurement and the features used to output
measurement data to a computer or peripheral equipment.
Communication cables: "31. OPTIONAL ACCESSORIES"
Output format and command operations: "Interfacing with the SOKKIA SDR
Electronic Field Book" and "Command Explanations" manuals.
PROCEDURE
1. Connect SET and host computer.
2. Allocate the [D-OUT] softkey to
the Meas mode screen.
"25.3 Allocating Key
Functions"
3. Sight the target point.
4. Press [D-OUT] and select "Angle
Data."
Output measurement data to
peripheral equipment.
34