Reviewing Job Data - Sokkia 130R Series Operator's Manual

20. RECORDING DATA - RECORD MENU -
20.7

Reviewing JOB Data

It is possible to display the data within the current JOB that is selected.
• It is possible to search for data within the JOB to be displayed by point number.
But the note data cannot be searched.
• Known point data that are entered from an external instrument are not
reviewed.
PROCEDURE
1. Press [REC] in the third page of
Meas mode to display <REC>.
Select "View" to display the list of
recorded points.
2. Select the point number to be
displayed in detail and press
[ ].
Details of the data is displayed.
This screen contains distance
measurement data.
• To display previous data item,
press [PREV].
• To display next data, press
[NEXT].
• [ ...P] = Use { } / { } to move
from page to page.
• [ ...P] = Use { } / { } to
select individual point.
• Press [TOP] to display first data.
• Press [LAST] to display last
data.
• Press [SRCH] to search for point
number. Input the point number
after "Pt. No."
96
Reviewing JOB data
Note
View
0 . 0 0 0