Sokkia 130R Series Operator's Manual page 29

* 1,2,3
To switch usual "S, ZA, H" display to "S, H, V", press [
* 4 Remaining battery power (BDC35A, Temperature=25°C, EDM on)
: level 3 Full power.
: level 2 Plenty of power remains.
: level 1 Half or less power remains.
: level 0 Little power remains. Charge the battery.
(This symbol is displayed every 3 seconds): No power remains.
Stop the measurement and charge the battery.
"6. USING THE BATTERY"
*5 Target display
Press {SHIFT} to switch the selected target. This key function can be used
only on the screens on which the target symbol is displayed.
:prism
:reflective sheet
:reflectorless
* 6 Tilt angle compensation
When this symbol is displayed, the vertical and horizontal angles are
automatically compensated for small tilt errors using 2-axis tilt sensor.
Tilt compensation setting: "25.2 Configuration -Config Mode-"
*7 Laser-pointer/Guide light (optional function) display
Selecting Laser-pointer/Guide light: "25.1 EDM Settings", Switching
Laser-pointer/Guide light ON/OFF : "5.1 Basic Key Operation"
:Laser-pointer is selected and ON
:Guide light is selected and ON
*8 Appears when laser beam is emitted for distance measurement
*9 Input mode
A :Inputting capital letters and figures.
a :Inputting small letters and figures.
5. BASIC OPERATION
SHV].
21