Sokkia 130R Series Operator's Manual page 52

12. COORDINATE MEASUREMENT
PROCEDURE Reading in Registered Coordinate Data
Known point data, coordinate data and instrument station data in the current JOB
and Coordinate Search JOB can be read in.
Confirm that the correct JOB containing the coordinates you want to read in is
already selected in Coordinate Search JOB in Memory Mode.
"22.1 Registering/Deleting Known Point Data", "21.1 Selecting a JOB"
1. Press [READ] when setting
Instrument Station.
The list of registered coordinates is
displayed.
Pt. : Known point date
saved in the current
JOB or in the
Coordinate Search
JOB.
Crd./ Stn : Coordinate data saved
in the current JOB or in
the Coordinate Search
JOB.
2. Align the cursor with the required
point number and press {
The point number that was read in
and its coordinate is displayed.
• [ ...P] = Use { } / { } to move
from page to page.
• [ ...P] = Use { } / { } to
select individual point.
• Press [TOP] to move to the first
point number on the first page.
• Press [LAST] to move to the last
point number on the last page.
• Press [SRCH] to move to the
"Coordinate Data Search
Screen." Input the point number
you want to search in "Pt. no."
The search may take time if
many data are registered.
44
N 0 :
}.
E 0 :
P t .
I n s t . h
T g t . h
0 . 0 0 0
9 . 8 7 6
5 . 4 3 2
P N T- 0 0 1
0 . 0 0 0
0 . 0 0 0 m
R E C
m
O K