Replacing The Power Distribution Board - Fujitsu PRIMERGY GX2560 M7 Upgrade And Maintenance Manual

6.4

Replacing the power distribution board

Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screwdriver
Preliminary steps
▶
"Locating the defective server" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶ Disconnect all external cables.
▶
"Getting access to the component" on page
▶
"Extending the server out of the rack" on page
▶
"Removing the server from the rack" on page
▶
"Removing top covers" on page
▶ Remove all PSUs, see
▶
"Removing the air duct" on page
▶ Remove all riser modules, see
▶
"Removing the crossbar" on page
▶
"Removing the fan cage" on page
Removing the system board plate
▶ Remove the system board, see
GX2560 M7
38.
45.
"Removing the defective hot-plug PSU" on page
58.
"Removing the riser module" on page
66.
69.
"Replacing the system board" on page
Upgrade and Maintenance Manual
Power supply unit (PSU)
Hardware: 60 minutes
37.
38.
39.
39.
41.
105.
62.
297.
107