Eaton LoadStar-S JSB Mounting And Operating Instruction page 39

16.5. Table configure Luminaire setup (Login = Uninstructed specialist)
Ope- Icon
rating
steps
1
2
3
4
5
6
Mounting- and Operating Instruction Eaton LoadStar-S JSB 40071860396 March 2021 www.ceag.de
16.5. Table configure Luminaire setup (Login = Uninstructed specialist)
Function
Icon Menu
Icon Luminaire
setup
Icon SKU,s
There can be up
to 40 SKU or SOU
circuit modules
preceding it.
Icon luminaires
Up to 20 lumi-
naires can be
connected via
circuit to.
Icon General
Information can be
entered for each
luminaire.
The switching
mode can be
determined via the
icons switches 1
and 2.
The switching and
monitoring mode
can be determined
via the icons swit-
ches 1 and 2.
Up to two swit-
ches can be
assigned to each
lamp in the „Pro-
gramming by lamp
setup" mode.
Entries
Actuate
Actuate
Activate the circuit module icon to be
configured.
Press the light icon which should be
configured.
Enter name, information e.g. moun-
ting location and required tool, power
in W and VA, category and type:
Icon without CG-S = no monitoring,
Ready light icon= Only at power failu-
re switched on.
Permanent light icon= Permanently
on.
Icon Option Input=Light switches on
via the ACU inputs.
Icon GLT Switch=
Luminaire switches on via LON
switch.
Icons Timer= luminaire switches on
via programmed TimerFunction.
Icon IO/3PM-IO = Luminaire switches
on via separate I/O modules.
39